The future brought by non-heating semiconductors.jpg

As data throughput per unit of time increases, power consumption rises,
and consequently, heat generation begins to increase.
You can think of it as semiconductors converting 100% of the power they use into heat.
This is because in a semiconductor capacitor, a charge represents 1 and no charge represents 0,
and when this stored charge is discharged through resistance,
the charge is converted into heat.
However, there is a solution: installing a charge recovery layer in the semiconductor oxide layer,
and there is a specific voltage used when discharging the charge from the capacitor.
When this voltage is applied to the transistor, the charge in the capacitor escapes to the outside.
The method involves collecting the pressure generated during this process in parallel to charge a battery.
By combining the charge recovery layer with a central charge recovery device,
the charge collected by the central charge recovery device is used to charge a computer auxiliary battery.
This means computers will now have their own built-in batteries.
When the battery is charged above 80%, it uses battery power + external power,
and when the battery drops below 20%, it uses 100% external power.
As you use the computer, the auxiliary battery charges, and once it reaches a certain level, the system
automatically runs on both the battery and external power to improve power efficiency and reduce heat.
The battery is charged using the voltage applied when discharging the charge from the capacitor.
If non-heating semiconductors are developed, maximizing energy efficiency and reducing heat by over 90%
will make the stacking of CPUs and GPUs possible.
Comments 0